Evolis Avansia Guide de l'utilisateur télécharger pdf (Page 72)

Card positioning

You can set the orientation of loading magnetic cards.

You can also change the settings by using the printer driver.

This setting is only available when the optional encoder unit is attached.

Switch from Normal mode to User mode.

Press the t Key until [Card Setup] is displayed. Then press the SET Key.

Press the t Key until [Set card side] is displayed. Then press the SET Key.

Change the settings [Standard] or [Reverse] by using t/s Keys, then press the SET key.

Open the Top cover.

Open the card feeder.

Insert magnetic cards depending on the mode.

Close the card feeder and the top cover.

The factory default setting is [Standard].

Printing on the magnetic strip terminal cannot be guaranteed.

[Standard] : [Reverse] :

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 80 81

USER GUIDE 1
Copyright 2
Copyright notice 2
Trademarks 2
Warranty 2
About your new printer 3
Warranty registration 3
Getting started 3
Contents 3
Installing location 5
Power supply 5
Handling 6
Security cable 6
1-3b INSIDE OF THE TOP COVER 7
1-3c REAR SIDE OF THE PRINTER 8
1-3d FRONT COVER 8
1-4 Installation 9
1-5 Installation 10
1-5b CONNECTING THE PRINTER 11
1-5c RIBBONS AND FILMS 12
Changing the ink ribbon 13
Fitting the ink ribbon 14
Changing the Transfer film 15
Close the front cover 16
1-5d CARDS 18
Cards orientation 19
Adjusting card thickness 20
Loading the cards 21
Removing printed cards 22
Rejected card management 24
Printing 25
“Card” tab 27
“Graphics” tab 27
“Conguration” tab 27
“Maintenance” tab 27
2-3 Printing a card 28
Maintenance 31
3-2 Routine printer cleaning 32
>> 33
The adhesive side is 34
Turn off the printer 36
Load the card feeder 36
Decurl Section 37
Reverse Roller 38
Flat Screwdriver 40
3-8 Cleaning the print head 41
4-1a NORMAL MODE 43
4-1b USER MODE 44
4-2 Warnings and diagnosis 45
Warnings and error messages 46
4-3 Diagnosis help 48
4-4 Troubleshooting 49
Poor print quality? 50
The card is bent 51
Print akes off 51
White cards 51
Partial or incorrect printing 52
4-4b FREEING JAMMED CARDS 54
Feed slot 55
Feeding 56
4-4c REPLACING THE PRINT HEAD 57
4-10 Others functionalities 64
Short Size Print 65
Language 65
4-11 Technical support 66
Appendix A 67
Evolis High Trust 68
ribbons 68
Size and weight 70
Appendix B 71
Card positioning 72
bits per inch 73
Except for the “?” character 73
Contact station location 74
Computer connection 78
Appendix C 79
(RSS-102) 80
C1b - FCC REGULATION 81

Commentaires sur ces manuels

Pas de commentaire

Evolis Avansia Guide de l'utilisateur Page 72

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimer et scanner Evolis Avansia